About M32 iEQ:

M32 iEQ is an iPhone App which has the following features:

1. Audio Analyser having Oscilloscope, FFT, Sonogram and 1/3 Octave RTA Bargraph views.
2. 31 band Graphic EQ which can control the EQ Racks in the Midas M32 series of consoles, and can also control a group of Behringer DEQ2496 EQs via MIDI over WiFi

A typical M32 setup is shown below:

A typical DEQ2496 setup is shown below:

The hardware/software requirements are as follows:

To run an M32 Console:

A wireless router and Ethernet cable

Hardware: iPhone 3GS or later, or an iPad

Software: iOS6 or later.

To run a DEQ2496:

Hardware: iPhone 3GS or later, iPad, Mac or PC with WiFi and USB

Software: iOS6 or later, and installed on the host computer: UMMU Server and a suitable MIDI Interface (ie MIDISport 2 x 2).

Installing and using UMMU Server (only required for DEQ2496):

Firstly, download UMMU Server for Mac or Windows http://www.strongsoft.co.uk

Unzip the UMMU Server App, and place it in your Applications Folder (Mac) or your Programs Folder (PC). UMMU Server must be launched first, then the M32 iEQ App (on the iOS Device).

When the UMMU Server is launched, you will see the following window (MacOSX pictured, using MIDI Interface):

Once this window is visible, you should be able to set your MIDI routings using the pull-down menus - once
you've done this, you're ready to go!

Using M32 iEQ when there's no WiFi network Available (for DEQ2496):

To do this you must create a computer to computer network (P2P):

For PC: Google 'Setting up a P2P Network on your PC.

For Mac:

In the Airport menu (see below), click on 'Create Network':-

In the dialogue box that appears, type a name for your P2P network (anything will do!)

The airport icon will change to the P2P icon (see below):-

You can now connect to this network from your iPhone in 'Settings' > 'Wi-Fi'. Just select your P2P nework name from the list.

Finally set your UMMU Server SEND IP settings to the IP address of your iOS device:

Setting up the Console:

Set up the IP address of the console as per the M32 manual. Enter the M32 IP address into the M32 iEQ App in the Settings View ( you will need to select M32 in the Settings View before the M32 IP button becomes visible)

The FFT View:

contents

This view loads by default on launch. You can access the oscilloscope view by deselecting the FFT button.

The Oscilloscope View

See Above.

The Sonogram View

The Sonogram shows a view of sound energy over time, the frequency is represented by the y-axis, time by the x-axis, and the energy by the colour of the trace (red = loud, blue = quiet). Accessthe Sonogram by pressing the 'Sonogram' button. Return to the previous view by tapping anywhere on the screen.

The RTA/GEQ View