UMMU Box Rev 3 Information:-
All Rev 3 Boxes have the latest firmware (3.4.3) already installed, and are ready to use.


UMMU Box Rev 3 - Now in stock!

Rev 3 UMMU Boxes are now in stock, and are now available on eBay and on this site (cheaper here!)
The Rev 3 Box has WiFi built in, and an external extendable antenna, so you don't need an external router.

UMMU Box Rev 3 (WiFi built in) - including PSU and USB Cable:-
Price inc. Shipping
UMMU Box Rev 3 (WiFi built in) - Box only - (PSU and USB Cable NOT included):-
Price inc. Shipping

The UMMU Box Rev 3 performs an LED sequence on power-up, the meaning of which is as follows:

// init

long green
long red
5 short green
5 short red

pause:

// box revision:

3 simultaneous green and red flashes = Rev 3

pause:

// software revision

number of green flashes = software revision number

pause:

//software revision after decimal point

number of red flashes = software revision number after decimal point

for example, if software revision is 4 then:-

0 = 2.4.0
1 = 2.4.1
2 = 2.4.2

and so on...



UMMU Box Rev 3- A typical setup...

UMMU Box Rev 3 - DIO Settings on the Console...
01v96 MIDI Setup

01v96 is illustrated...

LS9 settings are similar.

01v and 03D only have MIDI option.

(See below)



UMMU Box Rev 3 - MIDI Settings on the 01v Console...
01v MIDI Setup...


UMMU Box Rev 3 - MIDI Settings on the 01v96 Console...
01v96 MIDI Setup...


UMMU Box Rev 3 - MIDI Settings on the 03D Console...
03D MIDI Setup...




UMMU Box - Settings on iOS device...
  1. Select your UMMU Box Rev 3 from the WiFi menu - your SSID begins with UB-
  2. You will be asked for a password. There is a sticker on your UMMU Box describing how to obtain your password.

 

 

The default IP address of the router is: 192.168.4.2

This IP Address is retrieved automatically on connection to your UMMU Box Rev 3.

 

 

 

 


UMMU Box Rev 3 - Problems with internal Connectors
01v96 MIDI Setup

If for any reason you have problems, a connector may have become unseated (this is unlikely as they are secured with 'hot-melt' adhesive).

But just in case, here are the positions...

First for the black wires (a double connector, orientation unimportant) :-

Then for the red wires (single connectors, one is for the green LED, the other for the red LED - just trace them back to the LED and look at the colour [of the LED]).


UMMU Box Rev 3 - Problems with internal Jumpers
01v96 MIDI Setup

If for any reason you have problems, a jumper may have fallen off (quite unusual)

But just in case, here is a picture...



STRONGSOFT LIMITED ® | +44(0)1920 870711 | info@strongsoft.co.uk | 4 Amwell Lane, Ware, Herts SG12 8DX
Company Number: 10660762